Description
The Pyxis Lab® ST-772P optical luminescent dissolved oxygen (DO) sensor is based on the principle of ‘Fluorescence Quenching’ to determine dissolved oxygen content in water. This sensor incorporates Pyxis’ advanced technology in the field of fluorescence detection, using Blue/Red Light Detection technology with excitation and reference light sources to offer a wide detection range and extremely low detection limit. The sensor also integrates temperature and pressure sensors to perform compensation for the measurement of dissolved oxygen based on ambient environmental conditions.
The ST-772P offers an easily replaceable, front loading DO membrane cap that has been independently developed by Pyxis Lab® with a typical service life of up to 2 years. This unique DO membrane cap design incorporates a black microporous PTFE membrane material designed to provide extreme scratch resistance, extended life span and simple replacement. The flat front-end design of the ST-772P makes this platform less prone to contamination or fouling and is very easy to clean.
The sensor body is composed of CPVC and is well suited for aggressive industrial application use. The ST-772P (CPVC) should be utilized in a submersed fixed or floating application with the Pyxis submersion assembly options. The ST-772 series offers both 4-20mA and RS-485 Modbus outputs and is Bluetooth® enabled when used in conjunction with the MA-CR Bluetooth Adapter.
Features
- 0.004–20mg/L Measurement Range
- No Membrane Replacement or Electrolyte Replacement
- Simple DO Cartridge Replacement every 2 Years
- Built-In Temperature & Pressure Sensor with Automatic Compensation
- Accurate and Stable Measurement with Ultra-Low Drift Requiring No Calibration for up to 2 Years
- Built-In Transmitter without Preamplifier or Meter Head
- Dual Outputs both 4–20mA Isolated Signal & RS-485 Modbus
- Wireless Calibration, Diagnostics, Data Trend via uPyxis® app when used with MA-CR Bluetooth® Adapter
- Slope Calibration with Air or Air Saturated Water / Zero Calibrate with 5% Sulfite Solution or Nitrogen Gas
- Submersible (ST-772 or ST-772P) or Inline Pipe Tee (ST-772T or ST-772T-P) Installation Versions Available
Typical Applications
- Activated Sludge
- Aeration Basin
- Nutrient Removal
- Wastewater
- Sewage Processing
- Chemical/Process Water Applications
- Domestic/Drinking Water Applications
- Filtration Applications
- Aquaculture
- Agriculture
- Compliant USEPA 40CFR Part 136.3 as an Approved Method for Measurement of Dissolved Oxygen in Wastewater, Drinking Water and Direct Discharge
Reviews
There are no reviews yet.