Description
The Pyxis ST-710SS is a pH composite sensor that is designed to simplify installation. In addition to calibration and in-use operation in process water, industrial water, wastewater and cooling water applications. These sensors are uniquely designed to offer an embedded transmitter and can be utilized in both 4-20mA or RS-485 Modbus formats. When utilized in RS-485 Modbus format, these sensors also provide a temperature output signal. These features dramatically improve application possibilities allowing the ST-710SS series of sensors to be directly connected to any micro processor based controller, PLC and Distributed Control System.
The ST-710SS series flat pH bubble increase their resistance to highly turbid waters and contamination. The enlarged salt bridge design with large junction capacity also ensures a significantly longer sensor life with minimal maintenance. These devices are ideally suited for hard to measure waters where conventional pH sensors would have otherwise failed. The ST-710SS series of sensors are produced with a 304 Stainless Steel Body and are designed with a removable and replaceable electrode head assembly.
Each sensor offers a unique design Electrode Head Assembly incorporating the complete sensor electrode and appropriate electrolyte solution in an easily replaceable format. Each sensor offers a six foot cable with8-Pin quick adapter as well as a 1.5-foot flying lead wire with 8-pin adapter for rapid installation and replacement. The ST-710SS series are provided with the ST-001 Pyxis standard ¾” NPT-CPVC installation Tee for in-line flow applications but may also be installed in submersed applications using the MA-102S Submersion Adapter Kit. Additionally, larger pipe size installation Tee’s are available from Pyxis Lab.
Features
- Easy and replaceable electrode head with simple replacement
- Accurate and stable measurement with ultra-low drift
- Built-in transmitter without preamplifier or meter head
- Dual Outputs both 4-20mA isolated signalsor RS-485 Modbus
- Long-distance transmission with higher stability & accuracy
- Wireless Calibration, Diagnostics, Data Trend via uPyxis APP when used with MA-CR Adapter
- Tolerant to frozen conditions during shipment or storage for short periods
- Large junction capacity 3-4X Electrolyte Solution Content
- Enlarge Platinum Disk
- Longer service life
High Performance Sensor for Data Center Cooling
The ST- 710SS is ideal for data center applications, enhanced coolant, and water quality monitoring. Able to handle critical systems like condenser and technology cooling. Designed for seamless integration, the 24V DC-powered sensors feature low power demand (<1.5W), with built-in transmitters. Easy or direct communication with DCS or PLC systems and durable 304 stainless steel construction. Enabling operation under high pressures up to 290 psi. These features streamline installation, maintenance, and ensure reliable performance in demanding data center environments.
Reviews
There are no reviews yet.