ST-710SS Stainless Steel Inline pH Sensor

Simplistic, Industrialized, Stainless Steel pH Sensor.

A simple to use inline sensor that measures for pH (0–14). Built robustly for Industrial Water Treatment applications!

CE Mark 

$1,068.00

Description

The Pyxis ST-710SS is a pH composite sensor that is designed to simplify installation. In addition to calibration and in-use operation in process water, industrial water, wastewater and cooling water applications. These sensors are uniquely designed to offer an embedded transmitter and can be utilized in both 4-20mA or RS-485 Modbus formats. When utilized in RS-485 Modbus format, these sensors also provide a temperature output signal. These features dramatically improve application possibilities allowing the ST-710SS series of sensors to be directly connected to any micro processor based controller, PLC and Distributed Control System.

The ST-710SS series flat pH bubble increase their resistance to highly turbid waters and contamination. The enlarged salt bridge design with large junction capacity also ensures a significantly longer sensor life with minimal maintenance. These devices are ideally suited for hard to measure waters where conventional pH sensors would have otherwise failed. The ST-710SS series of sensors are produced with a 304 Stainless Steel Body and are designed with a removable and replaceable electrode head assembly.

Each sensor offers a unique design Electrode Head Assembly incorporating the complete sensor electrode and appropriate electrolyte solution in an easily replaceable format. Each sensor offers a six foot cable with8-Pin quick adapter as well as a 1.5-foot flying lead wire with 8-pin adapter for rapid installation and replacement. The ST-710SS series are provided with the ST-001 Pyxis standard ¾” NPT-CPVC installation Tee for in-line flow applications but may also be installed in submersed applications using the MA-102S Submersion Adapter Kit. Additionally, larger pipe size installation Tee’s are available from Pyxis Lab.

Features

  • Easy and replaceable electrode head with simple replacement
  • Accurate and stable measurement with ultra-low drift
  • Built-in transmitter without preamplifier or meter head
  • Dual Outputs both 4-20mA isolated signalsor RS-485 Modbus
  • Long-distance transmission with higher stability & accuracy
  • Wireless Calibration, Diagnostics, Data Trend via uPyxis APP when used with MA-CR Adapter
  • Tolerant to frozen conditions during shipment or storage for short periods
  • Large junction capacity 3-4X Electrolyte Solution Content
  • Enlarge Platinum Disk
  • Longer service life

Specifications

Item ST-710SS
Part Number 53030
pH Range 0-14 pH
pH Resolution ±0.01 pH
Response Time 95% within 5 Seconds
Power Supply 12-36VDC, 1W
Output 4-20mA Isolated, RS-485 Isolated
Connector IP67 Water-Proof Connector/Cable 1.5m (4.5ft)
Operation Pressure up to 0.7MPa (100psi)
Installation ST-001 3/4in Tee Assembly
MA-102S Submersion Adapter
Storage Temperature -20-60 °C (-4-140 °F)
Operation Temperature 40-120 °F (4-49 °C)
Housing Material Stainless Steel
Dimension 6.8in (172.7mm) L, 1.44in (36.6mm) D
Weight 0.37lbs (170g)
Typical Service Life 2+ Years
Warranty 13 Months from Date of Shipment
Regulation CE / RoHS

Support Documents

ST-710SS User Manual V0.93

ST-710SS Series Inline pH-ORP Sensors Datasheet

Reviews

There are no reviews yet.

Be the first to review “ST-710SS Stainless Steel Inline pH Sensor”

Your email address will not be published. Required fields are marked *

You may also like…

Shopping Cart
Scroll to Top