Better Drinking Water
Panel Solutions
Turn-Key Monitoring Solutions for
Free Chlorine.
Chlorine Dioxide.
Turbidity.
pH.
Temperature.
IK-765SS
A simple pre-mounted panel solution for those desiring to measure for Free Chlorine or Chlorine Dioxide.
- Free Chlorine or ClO2
- UC-50 Display & Terminal
- FR-50 Flow Reservoir
- Plug & Play Pre-Mounted Panel
DW-2100P
The full package for Drinking Water Applications. Measure for Ultra-Low Turbidity and Free Chlorine or Chlorine Dioxide with this pre-mounted panel solution.
- Ultra-Low Turbidity
- Free Chlorine or ClO2
- UC-100 Display & Terminal
- FR-200 Flow Reservoir
- Plug & Play Pre-Mounted Panel
DW-739
A simple pre-mounted solution for those desiring to measure for Ultra-Low Turbidity.
- Ultra-Low Turbidity
- UC-100 Display & Terminal
- FR-100 Flow Reservoir
- Plug & Play Pre-Mounted Panel
EPA 180.1 & 334.0
ISO 7027 & 7393
Watch our launch video
Tech being utilized
ST-765SS-FCL
Measure for Free Chlorine, pH & Temperature with one robust, smart sensor.
- Free Chlorine (0–5ppm)
- Internal Compensation
- Replaceable Sensor Head
LT-739
Our EPA Compliant Ultra-Low Turbidity Sensor that utilizes Warm White LED Light Sources.
- 0.001–40.00NTU Range
- Warm White LED
- EPA-180.1 Compliant
LT-739B
Our ISO Compliant Ultra-Low Turbidity Sensor that utilizes InfraRed LED Light Sources.
- 0.001–40.00NTU Range
- InfraRed 860nm LED
- ISO-7027 Compliant
ST-765SS-CLO
Measure for Chlorine Dioxide, pH & Temperature with one robust, smart sensor.
- ClO2 (0–5ppm)
- Internal Compensation
- Replaceable Sensor Head
FR-Series of Flow Reservoirs
Sample calming vessel for dissipation of air bubbles & settling of suspended solids.
UC-Series of Displays
Display & Data Logging Terminal with an Integrated Sensor Calibration Interface.
Typical applications
- Drinking & Domestic Water
- Sanitary Water & Secondary Water Supply
- Decorative & Swimming Water
- Food & Beverage Process Water
Key features
Our advanced research and development sensor technologies to achieve highly accurate and stable measurement of Turbidity, Free Chlorine, pH and Temperature.
Our LT-739 (EPA) & LT-739B (ISO) Ultra-Low Resolution Turbidity Sensors offer a detection light source using Warm White LED in 90º surface scatter in accordance with EPA-180.1 standards or InfraRed 860nm in accordance with ISO-7027.1 standards. The sensors are mounted in the unique FR-Series Flow Reservoirs enabling the highest resolution possible of 0.001NTU with UNMATCHED stability. These sensors are simple to calibrate using the LT-SOLID-CAL Solid State Turbidity Calibration Kit (no Formazin needed) or the L-CAL Portable Liquid Turbidity Calibration Kit (uses 500mL of Calibration Solution).
The ST-765SS Series are stainless steel multi-parameter membrane-less sensors based on unique electrochemical principles to determine free chlorine or chlorine dioxide and pH content in water. These sensors incorporate Pyxis Lab® advanced technology in the field of bare-gold electrochemical detection. The ST-765SS-FLC sensor integrates Free Chlorine, plus pH measurement while the ST-765SS-CLO integrates Chlorine Dioxide plus pH measurement. Both can perform temperature and pH compensation for the measurement of Free Chlorine or Chlorine Dioxide based on the conditions present in the application of use. This unique internal compensation results in a highly accurate oxidizer measurement consistent with DPD wet chemistry methodology as high as a pH of 9.0 and is compliant with USEPA-334.0 & ISO-7393 guidelines.
Convenient and simple to install Back-Panel for rapid and easy installation. Truly a plum band power to go platform with intense factory setup, testing and sensor calibration prior to shipment.
30 DAY FREE PANEL TRIAL.
Fill out the contact form below to contact us about trialing any of the DW-Series Panels for 30 days!
